Live Help
Live Help

Troubleshooting Lower Water Pressure

If you begin to notice a decrease in water pressure, the difficulty are usually in your plumbing system. Here are a number of the prevalent factors to consider whenever examining a low water pressure condition.

Obstructed Aerators
If the low water pressure is coming from an individual faucet, what the problem is could simply be a plugged or congested aerator. Remove the end of the faucet, and examine the aerator screen for corrosion, junk, rust or any other waste that could be restricting steady flow. For some people it usually is simpler to simply clean up or remove and replace the sink aerator altogether.

No Hot Water Pressure
If the low pressure generally seems to only be impacting the hot water, there can be an issue with ones hot water heater. Check the shutoff valve near the water heater, making sure that it is totally opened up. You should talk to a licensed plumber to examine the health of your water heater and determine if this is the source of problems of low water pressure.

Pressure Reducing Valve (PRV)
If for example your decreased pressure issue is present across the home, you should check your pressure valve. This could be a bell-shaped mechanism, which is commonly located close to where the main water line gets in your house. If the PRV valve was improperly readjusted or fails, it can result in a pressure loss, or even no water supply to the home.

Shut off Valves
Most residences and companies use a main shutoff valve. The position can differ, but most of the time it will probably be located within a separate box behind the meter or close to the PRV. This valve, which allows you to shut off the water flow to the house, can restrict the steady flow if it isn’t totally open. Even when a little closed, this shut off valve can minimize flows and reduce the water pressure.

Mineral Deposits
Found in older more mature homes, pipes such as galvanized water pipes are frequently seen. After awhile, mineral deposit buildup can take shape within the water pipe and thereby lessen the inner diameter of the water line, and also making the interior surface of the pipe to be rough. Though this wear away doesn’t necessarily produce a health threat, this can minimize your steady flow and pressure. In case you determine this to be a main problem, your only option would be to upgrade the plumbing in your home utilizing PEX or copper repipe.

Water System Distribution
When the pressure would seem to be marginally lower at specific times through the day, you may be finding the consequence of a demand peak on the water system. There’s commonly a couple of peak periods of time during the day. One is early every morning when so many people are getting prepared for school or work. And the other is the evening when you are arriving back at home from work. During this time period they are very often washing laundry, bathing, or watering the lawn. Of these times, you might notice a decrease in pressure, even so you should still have ample water providing you don’t in addition have one of the many challenges discussed within the other trouble shooting procedures.