Live Help
Live Help

Think you have a Slab Leak?

Do you really believe you’ve got a slab leak in the home? Normal symptoms can consist of seeing or feeling wet spots across the flooring. Especially very hot water spots. This can be detected by walking around the house in your bare feet. A second basic warning sign might be that the water bill is much higher. This is caused by the possibility that water is leaking under the pressure coming from the inbound water line. This means that the water will leak day and night every single day. That drives your water bill way up. Another sign that’s fairly frequent is that it can sound like the water is running when all the faucets in your home are off.


This problem of slab leaks developed in the Southwestern United States in the early 1980’s. During those times home building firms and contractors were putting together people’s homes on big concrete slabs. The building contractors would pour a big concrete floor slab foundation after which you lay in soft copper pipe while the cement remained wet. The piping would run the full length and width in the cement slab as necessary in order to reach precisely where they needed to get water within the residence and in accordance with the floor plan. The water line would come out of the concrete in whichever area the floor plan said would need water. For example, a pipe could stick up from the foundation at each bathroom, your kitchen and laundry room, among others.

The complication with the purpose of burying soft copper piping into a cement structure was that the copper was not strong. Any kinking, folding, twisting, or chipping would weaken the water pipe and gradually develop a pinhole leak. The pipes were typically broken during the installation and or cementing procedure. General contractors were unable to work with hard copper simply because it was banned within the building codes at the time.


The central cause of these kinds of leaks is broken or cracked soft copper tubing. The weakened pipes start pinhole leaks and become greater troubles of slab leaks. What is unique concerning these slab leaks is the fact they are developed in the concrete foundation. A foundation leak, by it’s very own nature is not a quick leak to fix.

Repair work scenarios

You may have 3 alternatives to fix foundation leaks. It is possible to jackhammer, epoxy or repipe.

The jackhammer route is less popular. It’s a truly disruptive process in which a crew enters and takes out the floor and then jackhammer through the concrete floor to find the water line. A portion of the water pipe around the leak is removed and updated with new pipe. The fresh patch of pipe is soldered in position by a plumbing contractor who knows the right way to weld. Once the new section of pipe is into position the water pressure is restored to be certain it won’t leak. If it finally doesn’t leak, the bare cement is remade and the floor is put back together.

Epoxy coating

Epoxy liner is a process where the internal parts of the water lines are cleaned and then lined with epoxy. This seals up the damaged spot and ceases the leaking. It comes with the added benefit of possibly preventing any future leakages because the coating is put on to all of your pipes in the slab foundation. The one challenge with this technique is that the coating itself can be a big problem in the future. Peeling after icy temperatures or weight pressure could get into the pipes and could cause health issues if swallowed.

Copper and PEX Repiping

The best choice is referred to as repiping. Repiping is when you basically reconstruct all of the pipes in the household separate from the soft copper pipe that may be buried in the foundation. The completely new system of water pipes is positioned in the home within the wall structure and ceilings, that entirely bypasses the existing slab piping.

Potential risks

The chance of not doing anything concerning your foundation leak is your property or home will likely to be moist and moldy. You’ll experience virtually no water pressure and the water bills can be sky high. The risk is in never making the repair in any way. The danger of the jackhammer is reasonably large. The risk of the jackhammer strategy is not that it doesn’t work. The grave danger is that you simply might have to do it more than once. You can see, quite often when you fix one particular leak this way another one occurs inside of a day or two. The potential likelihood of the Epoxy lining procedure is that the Epoxy itself has become a concern of one’s health. The best process should be to complete a repipe procedure. Very little risk is linked with PEX or copper repiping.

Cost Estimates to Repair the Damage

The commonly acknowledged wisdom is that you could anticipate to pay close to $1,500 for every modest leak repair. Copper repiping offers a permenant solution to repairing and preventing present and potential future leaks for the life span of your residence. You won’t ever need to get worried about it ever again.